The Importance of Sewer Line Repair

by Posted in Plumbing Tagged , , , ,

When your home’s sewer line is damaged, it can lead to a variety of problems. If you have spotted signs of a broken line, like squelching sounds when walking in your yard or smelly sewage odors inside your home, contact a plumber for repair as soon as possible.

Sewer Line Repair

A professional plumber has the tools and experience to diagnose and fix your sewer problem correctly, using either traditional trench methods or trenchless technologies. Visit https://www.plumbing-express.com/ to learn some of the benefits of working with a plumber to repair your damaged sewer lines:

A leaking sewer line isn’t just an annoyance – it’s a health hazard. Dampness around the home attracts pests and invites mold to grow, which can negatively impact the health of family members. Children and seniors are particularly susceptible to the mold spores that develop in damp areas. A professional plumber should address the situation immediately to prevent the growth of dangerous fungus and bacteria that can cause serious health problems.

Leaks aren’t easy to detect as they typically form underground, but a number of signs can indicate a problem. For example, unexplained puddles of wastewater around your property or the house itself is a clear sign that a sewage drain has cracked or ruptured. Other indications include a sudden and unexplained drop in water pressure or the smell of rotten eggs (which is caused by a chemical that is released when pipes break down).

Over time, clogged drains can lead to leaks. This is because debris like food scraps, baby wipes, grease, and hair find their way down the drain and can eventually build up. In addition, tree roots can also cause issues because they are naturally drawn to water and will eventually seep through cracks in a sewer pipe.

Another big warning sign that you have a sewer leak is an unexpected spike in your water bill. While it is normal for water bills to rise slightly as seasons change, a huge jump in your monthly expenses is a sign that something is wrong and that a plumber needs to be called right away.

A faulty or damaged sewer line can also result in raw sewage backflow, which can destroy plumbing fixtures and create a major mess in your home. In the worst case scenario, a broken sewage line can lead to the overflow of raw sewage into your basement and throughout the rest of your home. This can cause a lot of damage and make it unsafe for family members to be in the area. A plumber will need to be consulted immediately to perform a thorough inspection and begin the necessary repairs.

Mold

Mold growth in a home often indicates an underlying moisture problem that requires professional plumbing repairs. A clogged drain or sewer backup creates a damp environment that encourages mold development. Leaking pipes also dampen permeable building materials, such as walls and floors. Mold releases harmful spores that compromise indoor air quality and can lead to serious health problems.

An unexplained increase in pest activity is another common sign of sewer line issues. Rodents, such as rats and cockroaches, live in sewers and gain entry into homes through cracked or broken pipes. If an exterminator can’t get rid of a pest infestation, it may be time to call for a sewer line inspection.

A clogged drain or a broken pipe can cause water to pool in the yard. This excess moisture can damage landscaping, foundations and driveways. A plumber can determine the severity of the leak and recommend an appropriate repair method.

Water and sewage leaks can also soak into the ground, causing soil to sag or dip. This can affect the stability of outdoor features like patios and driveways, and may even result in sinkholes.

When the structural integrity of a home is compromised, a plumber may suggest a complete sewer line replacement. This can be done through a trenchless method or traditional excavation. The plumber can also recommend a solution that prevents future leaks and repairs, such as cured-in-place pipe (CIPP).

Keeping up with routine drain cleaning can help keep a home’s sewer lines healthy and free of obstructions. Proper disposal of paper products, grease and feminine hygiene products is also important to minimize blockages. Regular plumbing maintenance also helps to reduce moisture in the home, which can prevent mold and other problems. Adding dehumidifiers to basements and installing ventilation fans in bathrooms and kitchens can lower indoor humidity levels, further discouraging mold growth. A plumbing service can provide tips on preventing clogs and leaks, such as using drain covers in showers and toilets and maintaining a one-inch gap between appliances. A plumbing professional can also help homeowners determine if their home insurance policy offers a sewer back-up endorsement.

Damaged Foundation

If your sewer line breaks at the foundation, it can cause damage to the house. This is because the sewage will leak into the soil around the foundation and may push up against it. This can also cause the foundation to crack and sink. If you see any cracks in the foundation, it is important to call a plumber right away to get it repaired.

The plumber will need to use special tools to access the broken pipes under the foundation, so it is best if you hire a professional plumbing company that specializes in sewer issues and repairs. They will know exactly what tools to use and how to use them safely so they do not cause any further damage or disruption at your home.

To start the repair process, the plumber will dig an access hole in the front yard and then begin tunneling underneath the foundation. They will follow the pipe to find where it is broken, and then they will break up the old sewer line and remove it from the system. They will then install a new one in its place, and then they will connect it to your house’s plumbing system.

In some cases, it will be easier to do a trenchless repair instead of digging up the whole foundation and breaking up the old line. This option is typically much cheaper. However, the plumber will need to carefully inspect the area to make sure they are not going to hit any underground utilities or other structures that cannot be replaced.

It is also important to check the interior of your house for signs of a broken sewer line. Look for any water damage, especially mold that is growing on the walls. This is a sign that there is moisture in the soil surrounding the foundation, and it needs to be addressed as soon as possible.

There are also other signs that your sewer line is damaged, including sagging floors and a basement that seems too damp to be safe. You may also notice that doors and windows do not open or close properly. The most serious symptom is that your foundation is sinking or shifting, which can be very dangerous for your family.

Pests

A broken sewer line can attract pests to your home. Insects are attracted to water and food, which is why leaky plumbing equipment is a prime draw for bugs and rodents. Pests that are drawn to leaking pipes and other plumbing problems include drain flies, roaches, rats and more. The best way to avoid these unwanted guests is to get your plumbing fixed as soon as you notice a problem.

Pests that move in through a cracked sewer line can cause extensive and expensive damage to your home. Rodents and other rodents love to live in sewer lines because they offer protection from weather and other dangers. They can also breed and find a continuous food source in the organic slime that builds up in drains and other parts of your plumbing system.

Cockroaches are another common pest that loves to thrive in damp, dark areas. Cracked sewer lines provide a perfect entry point for these insects, which can then eat away at the foundation of your home and lead to more serious problems.

Leaky pipes are a perfect environment for drain flies to breed in, as well. If your toilet’s P-trap is empty, it means that sewage is flowing into your home’s drains unabated. Flies love the scummy, wet and dark conditions of your drain pipes and can quickly breed in these locations.

Cracked sewer lines can allow cockroaches and other pests to enter your home through the basement, crawl space or walls. These pests can cause serious health issues for your family.

Putting in a screen on your vent stack is an easy way to keep pests from getting into your plumbing and other parts of your house. This is especially important if you have an older vent stack that’s prone to clogs.

Plumbing and pest problems tend to converge into one big disaster, and if you let them persist, they could cost you thousands in repairs in the future. So make sure to fix your plumbing problems and get your pest control under control simultaneously. This will ensure that your home is protected from both serious pest infestations and costly damages.

How to Tell When You Need Emergency Plumbing Services

by Posted in Plumbing Tagged , , , ,

A plumbing emergency always seems to happen at the worst time, like when you have guests over or when it’s late at night. Knowing the difference between a true plumbing emergency and one that can wait can help you make the right call for your situation. Contact your local Plumbers in Shreveport in case of emergency.

Clogged Drains

plumbing

Clogged drains are a common cause for emergency plumbing, as they can quickly lead to flooding, water damage and even health issues. It’s a good idea to get to know the warning signs so that you can take quick action before it is too late.

The most obvious sign of a clogged drain is slow drainage in the affected sink, bathtub or toilet. This can be due to soap scum buildup, hair or even grease. In some cases, you may even notice that water is pooling up on the floor around your sink or bathtub. A clogged drain will also make gurgling noises when it is filled with water. This is a sign that the blockage is getting worse.

Another way to tell if you have a clogged drain is when you can smell something foul coming from the affected area. The odor will depend on what is trapped in the clogged pipe, but it will be unpleasant. You may also notice that there is a lot of trash in the sink, such as old food or diapers.

If you cannot fix your clogged drain with the help of boiling water and household products, it is time to call in a professional. Plumbers use specialized tools to clear even the most stubborn clogs, making it possible for you to regain full functionality of your plumbing system again.

One of the most serious problems that can occur is when multiple drains clog at once. This is typically a sign that there is a large sewer line clog and could be a health hazard for your family. The clog may allow waste to back up into your toilets and other fixtures, and it may even reach the kitchen drains and cause sewage backup.

If you have a drain clog, call in a professional right away to avoid costly repairs and potential health concerns. It is also a good idea to schedule regular drain cleanings with a professional, so that you can prevent drain clogs in the future. A professional can use a drain snake to remove the clog and inspect your plumbing for any other issues.

Broken Fixtures

There are plenty of things that can go wrong with your plumbing, from a simple clog to a major leak. Many of these problems are considered emergencies because they can cause water damage, threaten the health and safety of your family, or prevent you from having access to your own supply of clean, potable water.

Fortunately, there are some ways to know when a plumbing issue is truly an emergency. First, consider whether the problem poses a threat to your home’s structural integrity or safety. For example, a leaking gas pipe or sewer backup is an obvious emergency that requires immediate attention. Other reasons to call for emergency plumbing include:

If a broken fixture isn’t posing any threats, it might still be best to contact an emergency plumber. This is especially true if the problem could get worse over time, such as a leaking toilet that’s leaving a trail of rust on your floor. In this case, you should close the water valve to the fixture and try to clean it up as much as possible. You can also try to stop the leaking by taping a plastic bag over the fixture or blocking it off completely.

Another common sign of a plumbing emergency is if multiple fixtures are backed up simultaneously. This can be caused by a clogged toilet, a leaking washing machine, or other issues. If you experience this issue, shut off the water to each fixture and call a plumber immediately.

Frozen pipes are another serious plumbing problem that calls for emergency services. If left untreated, frozen pipes can burst, leading to costly repairs and water damage. Emergency plumbers can use specialized equipment to safely thaw frozen pipes and restore normal water flow.

It’s not uncommon for homeowners to walk into a basement full of water if they neglect to call for emergency plumbing. Water can cause extensive damage to flooring, furniture, utilities, and even the foundation of your home if not addressed promptly. Emergency plumbers can tackle any type of flooding issue and prevent further damage from occurring to your home or business.

Burst Pipes

One of the worst things that can happen is for a pipe to burst. This is considered a true plumbing emergency and requires the help of an emergency plumber as soon as possible to prevent further damage to your home or business.

When a pipe bursts, it can unleash gallons of water into the home or office. This can lead to severe damage and can cost a lot of money. It can also compromise the structural integrity of your building, leading to collapsed ceilings and weakened walls.

If you have a burst pipe, the first thing to do is turn off the water main. This can limit how much water leaks into the building until a plumber arrives. You should also try to minimize any additional damage by removing any electronics, paper documents, and other items from the area that is flooding. You should also make sure to close the water valve closest to the burst pipe so that it cannot send any more water through the broken pipe.

Another sign that you have a burst pipe is if you notice discoloration on your walls or ceiling. This can be caused by rust or other sediment from the pipes, and it is a clear indication that there is a problem with your plumbing that needs to be addressed immediately.

In addition to checking the water main, you should also check your water bills to see if there is a drastic increase in usage. This can indicate a burst pipe or a leaking fixture, and it will be good to know if you need to schedule an emergency plumber for repair work.

In some cases, a burst pipe will not be immediately apparent, especially if it is located in the basement or an enclosed space that is hard to access. If you suspect that you have a burst pipe, call your local emergency plumber and follow the tips above to limit the damage until the professional arrives. By taking these steps, you can limit the impact of a burst pipe and reduce the need for expensive repairs or rebuilding of your property.

Faulty Shut-Off

A shut-off valve is an important tool for preventing serious water damage. However, like any other plumbing component, it can break down over time. If yours stops working suddenly, it’s a sign of a serious problem that requires emergency plumbing services. To avoid this, have your plumber inspect it regularly for signs of wear and tear.

One of the most common reasons for a shut-off valve to stop working is that it’s partially stuck. This happens when the plumber turns it off but it doesn’t fully close, leaving water in your pipes. To fix this, your plumber will need to disassemble the faucet and unscrew the valve. They may need to use WD-40 or penetrating oil to loosen it up and make sure it can be closed completely.

Another way that a shut-off valve might malfunction is if the handle spins but doesn’t turn off your water. This can happen if the valve is old and worn down, or if there’s a blockage in the line. In either case, you’ll need a plumber to replace it as soon as possible to prevent further problems.

If your shut-off valves have stopped working, the first thing you should do is turn off the water at the main water valve in your home. This is usually located on the front side of your house near where the pipe enters the ground. Then, you should call an emergency plumber to come out and replace the broken valve.

A burst pipe can also cause major flooding and water damage if it isn’t fixed quickly enough. This type of problem is often caused by corrosion or frozen pipes, so it’s important to keep an eye on your home for any potential issues.

Other signs that you need an emergency plumber include a persistent clog, the smell of sewage in your home, or any flooding or water damage. Any of these can be dangerous and shouldn’t be ignored. By knowing the signs of a plumbing emergency and when to call an emergency plumber, you can save yourself a lot of stress and money in the long run.

What to Look For in a Hot Water Heater Repair

by Posted in Plumbing Tagged , , , ,

If your hot water heater is older than 10 years and a leak is occurring, you should consider replacement. However, if your unit is less than ten years old, a repair may make more sense.

Hot Water Heater Repair

Often times, hot water heater issues are easily fixable. In fact, many are quite inexpensive to solve. Contact Hot Water Heater Repair Morris County for professional help.

Hot water is something that most of us take for granted. We use it when showering, washing clothes or dishes and a host of other household chores. When you lose your supply of warm water it can cause major disruption in your home. To prevent this from happening, it is important to keep your water heater well maintained and to have a solid plan of action when something goes awry. This can help you avoid costly repairs and to feel comfortable that you can fix any issues quickly and efficiently.

There are several different reasons that you might not be getting enough hot water from your tank. One possibility is that the thermostat has been set to a higher temperature than you want. In this case, you can reset the thermostat to a lower setting (but not so low that it could cause scalding).

Another issue is that you might have an undersized hot water heater for your household needs. This can happen if you have a large family or if you are using a lot of appliances at the same time (like running the dishwasher and washing machine simultaneously). If this is the case, your plumber can recommend an appropriately sized replacement unit.

If you have a gas water heater, it is possible that the burner orifice has become clogged with magnesium and calcium sediments. In this case, you will need to call in a technician to clean the orifice and to adjust your gas pressure. In addition, you may need to replace your water lines, which requires removing drywall and should only be performed by a licensed professional.

Unusual smells or discoloration

If you notice a foul smell or discoloration in your water, it’s important to call in a professional right away. This is often a sign that your hot water heater may be nearing the end of its life and will need to be replaced soon. However, in some cases it can be repaired to extend the life of your unit. Water heater repairs can include replacing the anode rods in your unit. These metal rods help stave off corrosion in your tank. If they wear out, they can cause rust-colored water. In addition, the corroded rod can cause sulfur bacteria to grow in your tank, which produces that awful rotten egg smell. The odor can also be caused by hard water, which can deposit sediment in your tank. Installing a water softener or filter will usually resolve the problem.

If your heater has a rust-colored exterior, it’s likely that you need to replace the anode rods. These are normally made of magnesium or aluminum. Over time, these metals can react with sulfates in your water to produce hydrogen sulfide, which is the rotten egg odor you’ve probably noticed. The odor can be eliminated by temporarily raising the temperature of your water to kill the bacteria. This should be done with caution to avoid scalding. Water heater repairs can involve replacing the anode rod with a less reactive aluminum one, which should prevent the odor in the future.

If you’re noticing that it takes longer than usual to get warm water, this is another indication that your hot water heater is in need of repairs. Make sure the power to your unit is off and check the circuit breaker or high-temperature cutoff switch to make sure they haven’t tripped.

Thermocouple issues

Thermocouples are essential in gas water heaters for safety reasons. They are designed to detect whether or not the pilot light is burning and then send a signal to the gas valve so that it can allow in gas and keep the pilot light lit. If the thermocouple fails to detect that the pilot light is lit it will shut off the flow of gas causing the pilot to go out and then you won’t have hot water.

If the pilot light goes out frequently or the water heater is over 10 years old it may be time to replace the thermocouple. Cleaning the thermocouple can help but it is usually best to just buy a new one. You can do this yourself if you are DIY-inclined and have access to the correct tools. To do this you will need to shut off the gas flow and disconnect the thermocouple from the control unit. You will then need to purchase a replacement from either a plumbing supply center that carries your brand or the plumber who installed it.

Once you have a new thermocouple you will need to reconnect it to the control unit and the gas valve. When doing this you will need to use open-end wrenches to unscrew the gas tubes from the combination thermostat and the gas valve. Once disconnected you will then need to slide the old thermocouple out of the bracket by pulling and twisting.

Once the thermocouple is replaced you will need to re-connect the gas line and then screw in the pilot tube. You will then need to re-connect the electronic igniter for an electric water heater or the gas valve for a standing pilot water heater.

Dip tube issues

The dip tube is a long piece of plastic in the bottom of your water heater that transfers cold water to hot water. If the dip tube breaks or deteriorates, it can dramatically reduce the amount of hot water your home has available. If you’ve noticed a decrease in the temperature of your hot water or small pieces of plastic are showing up in your faucet aerators and washer supply tubes, it may be time to replace the dip tube.

Typically made of polypropylene, dip tubes have a lifespan of 10-12 years. Depending on your water chemistry and the chemical composition of your tank, they can wear out sooner than that. In the mid to late 1990s there was a manufacturing issue with a particular supplier of plastic dip tubes that are used in gas and electric water heaters. These tubes were prone to breaking and disintegrating, allowing cold water to mix with hot water in the tank and significantly reducing the amount of hot water available for use.

If you’re having problems with your dip tube, the first thing you should do is check your water heater’s serial number. If it’s between 1993 and 1997, you likely have a defective dip tube from this manufacturer that should be replaced.

You can purchase a replacement dip tube at any hardware store or online. It comes in two forms, one is a “flanged” style that fits over the pipe nipple and is drawn out of the tank by the nipple and another is a permanent installation that has a new pipe nipple attached to it that can simply be pulled straight up and out of the water heater. The new dip tube should be cut to the correct length before installing it.

Pressure valve issues

If you notice water leaking from the valve on your water heater, it is likely because there is too much pressure in the system. It may also be a sign that your thermal expansion tank is faulty. These problems can be costly due to the amount of water wasted as well as a potential environmental hazard if dirty runoff makes its way into natural waterways and ecosystems. In addition, excessive pressure can cause pipes to burst and lead to water damage in your home or business.

Pressure issues often begin with the temperature and pressure relief valve (T&P) malfunctioning. These safety features tend to sit without use for a long time and can wear out from age and overuse. When they do operate, however, it is to relieve excess pressure that has built up in the hot water heater. If the problem is not addressed, it can lead to a ruptured tank and flooding of your home or office.

To test whether your T&P valve is working properly, open and close the lever on the valve a few times to make sure it is functioning correctly. If it is still sticking or not opening and closing properly, you should call a professional plumber to replace the valve.

The Importance of a Home Inspection

by Posted in Home Inspection Tagged , , , , ,

Typically, home buyers will hire a certified inspector to generate a report on the property. Ideally, the buyer will be present for the inspection to get a first-hand look at the issues and discuss their severity.

Home Inspection

This can be used to negotiate with the seller and either cancel the sale or move forward with closing based on the results of the inspection. For professional help, contact Home Inspection Colorado Springs CO now!

A home’s foundation is a major part of the structure, and it affects its value. When purchasing a house, it’s important to get a thorough inspection of the house’s foundation to make sure there are no issues that need to be addressed.

A professional home inspector will usually have a standard process for inspecting a foundation. They will start by chatting with you to find out what concerns you have about the property. Then they will begin their visual inspection, checking for cracks in the cement or bricks as well as any signs of damage on the exterior walls. If the house has a pier and beam foundation, they will also enter the crawl space to examine the piers, beams, and joists.

In some cases, an inspector may recommend that a structural engineer write a report for you to determine the extent of any problems. This will help you understand the scope of the problem and how much it will cost to fix it.

While cracks in the foundation are common, if the cracks are wide or extend past the edge of the house, it could indicate that the foundation is shifting. This can cause problems like bowing walls, separating siding, and doors or windows that don’t open or close properly.

Some factors that can affect a foundation are natural, such as weather changes or earthquakes, and others are man-made, such as poor soil preparation, plumbing leaks, improper construction, grading, and tree roots. Homeowners can take steps to prevent foundation issues by maintaining proper soil slope, keeping trees away from the house, repairing gutters and downspouts, and installing a sump pump system. It is also recommended to have a radon test conducted, as radon gas can enter through cracks in the foundation and into the house.

Roof

The roof is one of the more important components of any home, as it protects everything inside from water damage and pest infiltration. A roof inspector examines the condition of shingles and flashing, the presence of chimneys or other rooftop structures, as well as the overall integrity of the roof structure. If there are issues, the inspector should note them in the report. Buyers can use this information to request that the seller make repairs prior to closing or negotiate the price of the house based on the cost of the needed repairs.

If it’s safe and possible, the inspector will also walk the roof to get a feel for how strong the sheathing is in certain areas of the roof such as valleys and around chimneys. The roof will also be examined for signs of sagging or spreading due to weakened joists, which can result in leaks and other serious problems down the line.

Other aspects the inspector should look at include the gutters and downspouts, grading of the ground (to ensure that rainwater flows away from the foundation), the plumbing system and electrical wiring to ensure that there are no faulty outlets or fuses. Inspectors should also check the fireplaces and attic. It’s a good idea for buyers to accompany the inspector during his or her rounds so that they can ask questions and gain a better understanding of the property they are considering buying.

It’s important for potential buyers to understand that even new construction homes may need a home inspection. Although a new building is less likely to have structural problems that need addressing, there can still be flaws like leaky pipes or a poor ventilation system that can lead to serious damage over time.

Electrical

Home inspectors check a variety of things in your home’s electrical system, including outlets, switches and light fixtures. They’ll look for the type of wiring (including whether it’s aluminum or older knob-and-tube) and make sure that there are working ground fault circuit interrupters, which help protect you from electrocution and electrical burns. They’ll also examine the breaker box to ensure that there are enough circuits for your home’s electrical load and that the breaker box itself is in good condition.

One of the most common electrical problems a home inspector will identify is improperly wired switches and outlets. People who do their own wiring or recruit someone with basic electrical skills often reverse the polarity on switches and receptacles, which poses a shock hazard. Home inspectors will also look for double-tapped breakers, which happen when two or more hot wires are connected to a single breaker. Since most circuit breakers are designed for single wires, this can cause overheating and a fire hazard.

Inspectors will also test the GFCI outlets in rooms where moisture is present (kitchen, bathrooms and laundry room) to see whether they’re functioning properly. If they aren’t, it may be a sign of bigger issues in the home’s electrical system, such as corrosion and outdated components.

If the breaker panel is older than 30 years, it’s generally recommended that it be replaced by an electrician because mechanical and electrical components tend to wear out with age. If you’re buying a new home, this can be an opportunity for you to request that the seller pays for a replacement so you’ll have a safe and functioning electrical system as soon as you move in.

Plumbing

The plumbing is a vital part of any home. It supplies the water needed to wash dishes, clean clothing, and take a shower or bath. It also helps to keep the house cool and hydrated by bringing in fresh air and removing waste. However, problems with the plumbing can be costly and hazardous. They can include leaks, clogs, and water damage. A professional home inspector can identify these issues and provide insights for homeowners or buyers.

During the plumbing inspection, the home inspector will examine the water supply lines, drain lines, fixtures, sinks, toilets, bathtubs, showers, outdoor spigots, and other related appliances to assess functionality and safety. They will look for signs of leaks, rust, and corrosion. They will also test the water pressure to ensure it is within an acceptable range.

Leaks are one of the most common plumbing issues. Whether it’s a small drip in the kitchen or a major burst in the basement, they can cause severe damage and result in high water bills. Leaks can also lead to mold, rot, and sagging floors or ceilings. If not repaired quickly, they can damage rugs, furniture, drywall, and priceless mementos.

A plumbing inspection can identify issues that could cost the homeowner a lot of money in repairs and maintenance. It can also help sellers address these issues before selling the property, making the house more attractive to potential buyers and avoiding last-minute negotiations or deal cancellations. The home inspector will evaluate the fixture condition and location of shut-off valves, and assess the pipe materials, age, and integrity to determine if they are nearing the end of their lifespan or have issues that may need repair or replacement.

HVAC

Homebuyers want to have a clear idea of what they’re getting into with their new home. A home inspection can help them see any potential issues that could lead to costly repairs down the road. A home inspection also helps buyers know what to expect when it comes time to purchase a warranty, so they can choose the best option for their situation.

A qualified home inspector should be able to answer any questions and concerns that arise during the inspection process. They should be able to provide a detailed and comprehensive report of the findings. If they don’t, it might be a good idea to look for another inspector.

While home inspectors are generalists, they do have specific skills and knowledge about certain systems and areas of a home. For example, an inspector can check for visible signs of water damage and leaks, as well as examine the pipes to ensure they are functioning properly. However, they can’t go into the attic to inspect the HVAC system and aren’t able to perform any tests on it, such as running the heater or air conditioner to determine whether they are working efficiently.

For these reasons, a separate HVAC inspection might be needed. Homebuyers should ask for a sample report before hiring an inspector and make sure to read through it carefully. They should choose an inspector who can clearly explain their findings and recommend any additional tests or procedures they may need to conduct in order to get a complete picture of the property’s condition.

An experienced home inspector will be able to offer more insight into the property than a newer inspector, as they have learned from their years in the field. They can help you find problems that a newer inspector might miss, and they can recommend any further inspections you need to be fully confident in your purchase decision.

How to Use a Plunger For Drain Cleaning

by Posted in Plumbing Tagged , , , , ,

Drain Cleaning is an important service that keeps the plumbing in your home working well. Without it, your pipes may experience clogs that can slow or stop water flow.

Drain Cleaning

Regular drain cleaning can help prevent clogs, eliminate bad smells, avoid drainage disasters, extend pipe life, and save money.

While some may think it is tempting to pour boiling water down the drain as a home remedy, this can actually damage the pipes. Boiling water can cause the lining of a drain pipe to crack or peel, leading to leaks and shortening the life of the drain line.

A better option is to use salt and hot water to break down grease clogs. The heat from the hot water melts the grease and forces it out of the pipe. To use this method, combine a cup of baking soda with half a cup of salt and stir well. Then, slowly pour the mixture into the clogged drain. It will fizz and bubble, so be careful not to overflow the drain. Allow it to sit for an hour, then flush with hot water. Repeat as needed to dissolve greasy clogs.

It is also a good idea to run hot tap water down the drain once a week, especially in kitchen sinks. This can help prevent hair, sanitary napkins and other debris from building up in the drain lines. You can also prevent clogs by purchasing mesh drain covers for your shower and tub, which will catch the majority of hair that might otherwise end up in the drain.

If you do experience a stubborn clog, try using a plunger or running a drain snake to shift the debris. For more serious clogs, you will likely need to remove the trap and clean it out or call a plumber for professional assistance. To avoid future blockages, consider using a commercial drain cleaner that is safe for all pipe types. Also, never put fats down the drain as they can solidify and clog your pipes.

Baking Soda and Vinegar

Baking soda is a great cleaning product, and its chemical reaction with vinegar can help to break down grime and dirt. However, it should be noted that this mixture is not intended to be a substitute for professional drain cleaning services.

The reaction between the two ingredients can often produce carbon dioxide, which will help to loosen some clogs. However, the chemical reaction is not strong enough to remove hard-to-reach blockages. This is especially true for those that are caused by grease or other sticky substances.

Vinegar and baking soda can also be used to deodorize your drains and garbage disposals. The combination of these two common household items can help to eliminate unpleasant odors, and it is recommended that the mixture be used at least once per week to prevent build-up and odors.

When using this method, it is important to remember that the chemical reaction can be dangerous if too much baking soda or vinegar is used. Therefore, it is recommended that only a small amount of each is used at any given time. The mixture should be allowed to sit for at least 10 minutes, and then it is recommended that the drain is flushed with hot water.

If you are experiencing a serious clog, it is recommended that you contact a professional drain and sewer cleaning service. This is especially important if you are trying to clear a large blockage in a pipe or sewer line. In most cases, professional cleaning services will use a professional-grade drain snake or other powerful mechanical tools to remove even the most stubborn clogs. For smaller clogs, the use of a homemade drain cleaner can often be quite effective and will not cause any damage to your pipes.

Plunger

When you have a serious drain clog, the plunger is probably the first tool that comes to mind. It is a handy and inexpensive tool that can be used to break up a variety of clogs in sinks, tubs and toilets. Using a plunger correctly can save time and money compared to the use of chemical drain openers. However, it is important to choose the right type of plunger for your needs and understand how to use it properly.

There are several different types of plungers, but the most common is a standard cup plunger. This is the plunger most people think of when they hear the word “plunger,” and it is the best for sinks, bathtubs and showers. A flange plunger, which is similar in appearance but has a larger cup, is designed specifically for toilets. Other types of plungers include a bellows plunger and a taze plunger.

To use a plunger, simply place the cup of the plunger over the drain and create a seal. Begin to push and pull up and down on the handle, creating suction and pressure over the clog. Continue to do this for 20 seconds or so and hopefully the clog will be broken up enough for water to flow freely. If it doesn’t, you may need to try again or call a plumber.

When plunging, be sure to wear rubber gloves and protective eyewear to avoid splashes or chemicals that can burn skin or eyes. Also, it’s a good idea to plug the drain with a cloth or rag so the plunger won’t slip off and block the drain opening. Once the clog is unblocked, run hot water down the drain to flush out any soap scum and prevent future clogs.

Wire Hanger

If you don’t have a professional drain snake but your sink, shower or bathtub drain is fully or partially clogged, it’s possible to rig up a homemade tool to fix the problem without disassembling your plumbing. Take a wire coat hanger and straighten it out as much as you can, then bend one end into a hook. Insert the hook into the clogged drain and try to fish out any gunk you can grab. This method works best on hair clogs or soap scum buildup that’s close to the drain. It won’t work on mineral clogs, though.

A coat hanger may seem like a foolproof way to clear a clogged pipe, but you should never stick an unbent wire coat hanger down your drain, even if the clog is near the surface. This could punch through old, corroded pipes and cause serious damage to your plumbing system.

You can also try using a length of pliable copper tubing to replace the hook of a traditional wire coat hanger. This works well for clogs in toilets and other drains that are more difficult to reach with other tools, including chemical cleaners.

While many homeowners reach for chemical drain cleaners when their drains are clogged, these products use corrosive chemicals that can damage your pipes and are not effective on small object clogs or significant mineral buildups. If you can’t get your clogged drain to respond to any of these DIY solutions, call a professional. Master Toronto plumbers can often fix a stubborn drain in just one visit. They can even recommend routine boiling water flushes that will help keep your drains free from clogs in the future.

Chemical Cleaners

Chemical drain cleaners come in a variety of forms, including liquids and gels. They’re typically available at big box stores and hardware stores. These products are effective at breaking up hard clogs, such as those caused by hair or grease. They can also dissolve mineral deposits. However, they can cause a lot of damage to pipes. In addition, they can emit noxious fumes that are bad for your health.

The most common ingredients in chemical drain cleaners are hydrochloric acid (muriatic acid), sulphuric acid, sodium hydroxide (lye) and caustic potash. These chemicals are dangerous to use and can cause many types of injuries. If muriatic acid comes into contact with your skin or eyes, it can burn them and create a painful burning sensation. It can also corrode your metal plumbing pipes, causing holes and leaks. Sulphuric acid can break down organic material, such as paper, cloth and hair, but it will also attack rubber, plastic and galvanized steel.

If you swallow chemical drain cleaner, it can poison you, causing diarrhea, vomiting that may contain blood and shock, states MedLine Plus. Most of these products are also bad for the environment. They can seep into groundwater and contaminate it. They can also kill bacteria in septic tanks, causing them to work less effectively.

If you’re in a hurry, chemical drain cleaners may seem like a quick and easy solution to your blocked pipe. However, there are many safer and more effective ways to unblock a drain. Before you resort to chemical cleaners, try using a plunger or drain snake. If these don’t work, call a plumber for professional help. If you are concerned about the safety of chemical cleaners, consider using green drain cleaning solutions.

Water Heater Repair – How to Find Out If Your Water Heater Needs Replacement

by Posted in Plumbing Tagged , , , , ,
water heater repair

Water heater repair can be expensive. If your repairs are costing 50% or more of the price of a new hot water heater it is worth considering replacement. If you are experiencing no hot water check the breaker in the electrical panel to make sure it hasn’t tripped or blown a fuse. Then locate the upper thermostat and press the reset button (usually red). Call your local Plumber Granada Hills to learn more.

Gas Control Valve

The gas valve on a water heater, also known as a control valve or a thermostatic gas valve, is an important part of the appliance. It regulates the amount of gas that flows into the tank, controlling the temperature and pilot light. It works by reading the temperature of the water inside of the tank and only releasing gas when it drops below the selected thermostat setting. The gas is then released through the manifold tube and into the burner located in the combustion chamber where it ignites by the pilot flame. If the pilot flame is obstructed or dirty, gas may not be ignited and could cause an explosion. The gas valve is usually black with an Emerson logo on the front and has a round handle that controls it.

A faulty gas valve can affect other parts of the water heater, such as the thermocouple and pressure relief valve, so it is important to have it fixed. Water heater repair specialists usually charge a flat service fee to replace a gas valve, but they will often add on an hourly rate if the job takes longer than expected.

It is possible to replace a water heater gas valve on your own, but it is best to leave this task to professional plumbers who are familiar with the process and understand how to avoid any complications. Before you attempt to replace the gas valve, turn off the power and the gas supply to the water heater.

You can find a replacement gas valve at your local hardware store or online, but be sure to get one that is compatible with your water heater. You will also need to make sure that you have the proper tools and materials for the job.

Thermocouple

Thermocouples and flame sensors are important components of a gas water heater. They convert heat from a pilot flame into an electrical current that acts as a switch to control the flow of gas to the burner assembly. However, sometimes these devices can malfunction and cause your water heater to stop working. Fortunately, there are some simple ways to test your thermocouple for problems and determine if it needs to be replaced.

Before starting any work on your water heater, you should always shut off the gas supply valve. This will ensure that no one accidentally turns the gas back on. Once the gas is turned off, you can proceed with removing the burner assembly and repairing or replacing the thermocouple.

You will need a few tools to perform this task, including wrenches and a screwdriver to remove the access panel or cover on your water heater. You will also need a wire cutter or stripper and a multi-meter. A multi-meter is a device that can measure voltage, current, and resistance, which will be useful for testing the thermocouple and other components in your water heater.

Start by removing the burner assembly manifold cover plate. This panel may be secured by nuts or screws that vary by brand and model of your water heater. Once the cover plate is removed, you will be able to see and reach the flame sensor, pilot tube, and thermocouple connections. Once the connections are loose, you can push down on the burner supply tube and disconnect the thermocouple and pilot tube from their connectors.

Carefully remove the old thermocouple from its bracket and clean off the metal surfaces on both it and the burner assembly manifold cover plate. You can reuse the gasket if it is in good condition or purchase a new one. After removing the old thermocouple, install the replacement and reconnect it to the gas control valve. You can then reassemble the cover or access panel and relight the pilot light to test the functionality of your new thermocouple.

Anode Rod

A sacrificial anode rod is a long metal rod made of magnesium or aluminum, which extends into the tank and attracts corrosive minerals like iron and limestone and corrodes them in place rather than the steel water heater tank. This prolongs the life of your water heater.

To check the anode rod, turn off the water supply and the power to the tank (consult your owner’s manual for specific instructions). Drain 2 to 3 gallons of water from the tank by connecting a hose to the spigot at the bottom of the tank and opening it. If the hex plug securing the anode rod is tight, consult your user manual to find its location and remove it. It may be helpful to have a friend brace the tank, if necessary, while you unscrew it.

After removing the old anode rod, inspect it for damage and replace it if necessary. To install a new anode rod, shut off the cold water supply valve and the gas control knob (if you have a gas water heater). Remove the hex head from the old anode rod, using a socket wrench, then apply pipe tape around the threaded end of the new rod. Screw in the new anode rod and tighten it clockwise until it can’t be turned any further by hand.

A sacrificial anode should be replaced every three years or as needed to prevent rusting of the water heater tank and protect against smelly, discolored water. Your plumbing professional can help you determine the correct size anode rod for your tank and recommend the type of anode to use. It is usually cheaper to buy a replacement anode rod at the hardware store than it is to replace your entire water heater.

Dip Tube

A water heater’s dip tube is usually made from heat resistant plastic. It serves as a sacrificial anode rod to attract and consume corrosive metals from the tank. This prevents corrosive rust from damaging the tank, and extends the life of the water heater. Depending on water chemistry and the material of the dip tube, it may last the lifespan of the unit or only a few years. If a dip tube is defective, it can disintegrate or fall from the tank, leaving a band of tepid water between the pool of hot and cold water in the top of the water heater. Debris from a broken dip tube can also invade the building’s water supply, clogging filters and strainers, and leading to reduced hot water volume and low pressure.

A common problem for both gas and electric water heaters, especially units manufactured between 1993-1997, is a defective dip tube. During this time, nearly all water heater manufacturers were buying and installing lower quality dip tubes from one manufacturer. These tubes break down, disintegrate and dissolve into various size fragments which clog filter screens on appliances and faucets. They can also erode the metal sacrificial anode rod.

Fortunately, replacing a defective dip tube is an easy do-it-yourself project for most people. Start by switching off the power at the circuit breaker and closing the water supply valve to the heater. Using a flat screwdriver, loosen the inlet nipple and pull out the old tube. Next, replace it with a new dip tube of similar construction. Make sure the new tube is properly aligned, extending to the bottom of the water heater. Once it’s reattached, restore the power and water supply and test the water temperature.

Pressure Valve

The pressure-relief valve is one of the most important safety devices on your water heater. If the temperature of the tank rises or the pressure reaches dangerous levels, the valve will open and release hot water into the discharge tube. This prevents the tank from exploding and flooding your home with water. It is recommended that homeowners test their pressure-relief valve on a yearly basis as part of their water heater maintenance.

To test the pressure-relief valve, first make sure that the water heater is turned off by turning off the electricity (for electric tanks) or the gas (for gas tanks). Position a bucket under the valve’s discharge tube and pull on the metal lever of the T&P valve to open it. Water should quickly discharge into the bucket, but if it doesn’t stop releasing water as soon as you let go of the lever, you need to call a plumber.

If the T&P valve sticks and won’t open, you can jiggle the lever much like you would a toilet handle. This may loosen it up enough to allow it to open and close properly again.

It is also a good idea to insulate the drain line from the T&P valve to avoid it freezing in cold weather. The drain line should angle downward and be made of heat-resistant material, such as copper. If you have any questions about your plumbing system, the expert team at Hackler Plumbing is always here to help. Contact us today to schedule your appointment! We offer both emergency services and regular maintenance to keep your plumbing in top condition all year round. We look forward to serving you!

HVAC Service and Repair

by Posted in HVAC Tagged , , , , ,
HVAC repair

HVAC technicians specialize in installing, maintaining and repairing climate control systems. Their job involves ductwork, furnaces, heat pumps, air conditioners and other equipment. Most HVAC technicians at https://hubbardmechanical.com/ receive training through vocational schools or apprenticeship programs. They are also required to have strong problem-solving skills and excellent attention to detail.

When looking for a quality HVAC repair company, it’s important to consider their licensing and insurance coverage. Also, read online reviews to see what previous customers have said about them.

Ductwork

When your ductwork lets air escape, your home will be less comfortable and your HVAC system will wear down more quickly. If you suspect a leak, hire an HVAC professional for ductwork repair. A leaking duct can cost you about 20-30% of your cooling energy.

Ductwork problems often involve mold, insects and debris. You can help prevent these problems by removing rodent droppings and other signs of infestation, regularly cleaning your ductwork and using pest control products in and around your house. It’s also a good idea to keep an eye out for a rancid smell, which is a sign of mold and mildew.

Air ducts are most likely to be damaged by holes or clogs, but they can also suffer from structural damage or be missing entirely. Most ductwork repairs involve patching holes and sealing cracks. This is usually cheaper than replacing a whole duct, especially if the ducts are fiberglass lined. Professionals can use a special type of tape designed for ducts to seal the hole. This tape is backed with a flame retardant to avoid fire hazards.

Leaking ducts are another common problem, and they can be hard to diagnose. A pro will either remove vents and look inside them or send a camera down the ducts to see where the leak is coming from. The more difficult a duct is to access, the more it will cost to repair.

Dirty ducts are a breeding ground for dust and other pollutants, which can clog your system and cause asthma and other respiratory problems. The best way to keep them clean is to vacuum your vents on a regular basis. You can also help prevent dirt and dust build-up by installing a filtration system in your home.

When a duct isn’t properly insulated, your heating and cooling bills will be higher than they should be. Insulation is especially important for ducts in unconditioned spaces, such as attics, basements and crawl spaces. In addition to reducing your energy costs, a well-insulated duct will also help reduce the noise from your AC running.

Thermostats

The thermostat controls your home’s heating and cooling system. It tells the furnace and air conditioner what to do, how much energy to use, and when to turn on and off. There are different types of thermostats, including digital and electro-mechanical models. Each type has its own unique issues and repair methods. The most common problems are related to the device’s electrical connections and its calibration. However, there are also mechanical components inside the thermostat that can become worn over time. In these cases, a professional may need to replace the thermostat.

There are a few minor problems homeowners can often fix on their own. If the thermostat has a blank screen or doesn’t show any information, replacing the batteries may be enough to get it to work again. If this doesn’t help, check the breaker box for a tripped switch. Switching the breaker to “Off” for a few minutes can help diagnose this problem as well.

If you have a hardwired thermostat, you’ll need to remove the cover to see what wires are connected. The most common ones are R, which is the red terminal for the heater and AC, W, which is the white terminal for heat, and Y, which is the yellow terminal for compressor activity. Check that each wire is in its correct place and tightened, using a screwdriver.

You should also clean the unit occasionally to reduce dust accumulation. Older mechanical models often suffer from problems with dust, which can block the lever and contaminate the bi-metal coil. You can often disassemble the thermostat to wipe down the components with a damp cloth or compressed air. You can also clean the small metal contacts on some models by sliding a piece of paper between them.

If you can’t get your thermostat to work, it’s usually best to call a professional. A certified HVAC technician will be able to quickly diagnose the issue and offer technical solutions. They can also determine if the thermostat is the only issue or whether there are other components that need to be repaired or replaced.

Compressors

Compressors are mechanical devices used to increase pressure on certain compressible fluids or gases, most commonly air. They can be as small as a fit-in-your-glovebox unit for inflating a flat tire or as large as a giant reciprocating compressor used in pipelines. Air compressors are used throughout industry to provide shop or instrument air; power tools, paint sprayers and abrasive blast equipment; phase shift refrigerants for air conditioning and refrigeration; and propel gas through pipelines.

Like any piece of machinery, it is inevitable that at some point your air compressor will need repairs. However, there are ways to keep these repairs to a minimum by keeping up with preventative maintenance routines.

Regular oil changes and filter replacements, draining the condensate traps and regularly inspecting for air leaks can go a long way in extending the life of your air compressor. Adding these items to your daily and weekly to-do lists will help prevent costly repairs down the line.

If you are experiencing frequent interruptions in production due to a failing air compressor, it is worth the effort to consider your options for repair or replacement. It may be that the cost of replacing the unit will soon pay for itself in energy savings. Your independent Kaishan distributor can help you develop a payback calculator for your specific application and facility to facilitate the decision making process.

When a compressor stops working, it is likely because the system is not building sufficient pressure. This could mean a blocked inlet air filter, faulty controls and sensors on rotary screw compressors or worn piston seals and rings in reciprocating compressors.

The first thing to try is to reset the circuit breaker that serves the compressor, if it has tripped. Then check that all plugs are in, the switch is on and there is power to the compressor.

When a compressor is not filling up, the most common cause is a ruptured air filter or clogged inlet valve. Other reasons could be a plugged or damaged drier or an air pressure regulator that needs to be cleaned or replaced.

Fans

The fan located inside the condenser unit, and the one in the blower that distributes conditioned air throughout your home, are vital parts of your HVAC system. Without them, your system will not cool your home properly. Both fans need energy to move the air, but they don’t always get that power because of issues with a capacitor or motor.

The capacitor is a small but mighty device that stores energy and provides it to the fans when needed. If you have a breaker switch that keeps flipping or is constantly tripping, the reason may be that the capacitor has burned out, which restricts the flow of power to your outdoor and indoor fans. An HVAC professional will inspect the capacitor to determine if it needs to be replaced and can make that repair quickly.

Your fan might also not be spinning because of a broken fan blade or a physical strike against another component in the system, such as a compressor. A qualified technician will inspect the fans and replace a damaged fan blade or physical strike.

Older air conditioning systems use belts to power the fans, and these are subject to general wear and tear. Loose or worn fan belts can stop the fan from spinning as it should, and an HVAC professional will replace the old belt, adjust it to specifications and lubricate other moving parts to restore full functionality.

You may also hear squealing noises coming from the blower fan, which is most often caused by a loose or worn belt that’s not producing enough power to turn the fan blades. A certified HVAC professional will replace the belt, lubricate other moving parts and adjust them to specifications to return proper airflow.

A humming sound from the blower fan might indicate that a reversing valve is defective or dirty, which could be causing the air conditioner to work inefficiently and cause your home to overheat. A licensed HVAC professional will replace the reversing valve and check the system for any other problems that might be preventing it from functioning correctly.

Water Heater Repair Basics

by Posted in Plumbing Tagged , , , ,

Most homeowners don’t give much thought to their water heater, until it goes bad. Suddenly, hot showers become impossible, laundry is left unwashed, and dishes pile up.

Water Heater Repair

Most common issues with water heaters revolve around the pilot light and gas control valve. But there are a number of other things that could go wrong with your unit. For professional help, contact Water Heater Repair Tampa now!

Thermostats are the brains of your water heater. They read the temperature settings in your home and determine when to turn on or off the heating elements to keep the hot water flowing. They also control the rate of flow. Having the thermostat properly set will ensure that you have enough hot water for your family to shower, wash dishes and bathe, as well as maintain your water heaters lifespan.

If you’re not getting enough hot water, the first thing to do is check the thermostat. It could be set incorrectly, especially if you’ve recently worked on the heater or moved into a new house. If it’s set higher than a preferable setting, it can increase your electric bill and cause your water to be hotter than you want it.

You should also check the electrical panel to make sure that the breaker is in the “On” position and that the fuse is not blown. If the breaker or fuse is blown, it needs to be replaced. It’s also a good idea to perform Ohms (or Resistance) tests on the upper and lower heating elements with the power to the tank off.

This will give you a better understanding of how the thermostat and heating elements function together and what the readings should look like. Once you’ve turned the water back on, perform the same tests to see if the heating element is working correctly.

Another possible reason for not having enough hot water is that the tank’s insulation is worn out. This is particularly common in older homes and can be a big problem with electric tanks. Insulation loss increases the amount of heat that is transferred to the bottom of the tank, which causes the metal to rust faster. It also clogs the supply lines and reduces the efficiency of the burners or heating elements.

A faulty thermostat can be difficult to diagnose and replace, but the process is not as complicated as you might think. Having the right information can save you time and money when it comes to repairs and maintenance.

Element

An electric water heater has two heating elements, and if one of them goes bad, you may notice your hot water doesn’t come through as hot. A heating element isn’t expensive, and you can usually find a replacement in a repair kit. If you do choose to replace the element, be sure to purchase a new gasket to ensure a good fit. You should also be sure to turn off power to your electric water heater, either at the main fuse box or the circuit breaker, before you attempt this repair.

A common problem with older units is a rust buildup in the tank that prevents the element from producing heat. This can be a very serious issue that can lead to the unit leaking and creating water damage. In this case, you may need to replace the whole water heater, but it is important to consult a professional plumber to see if repairing your current unit will work before making such a major investment.

Another problem with older units is that a puddle of water around the tank can cause severe damage to your home’s structure and must be addressed immediately by cutting off your water supply and calling a plumber. Often, this issue cannot be repaired and your unit will need to be replaced.

If you’ve tried to relight the pilot light and it still isn’t working, there may be an issue with your thermocouple or gas control valve. While these aren’t as easy to fix as the pilot light, they can be easily fixed by a professional.

Another common issue with older units is the dip tube, which helps to transfer cool water from the top of your heater down to the bottom so it can be reheated. The dip tube can become corroded or spring a leak, which means that your hot water will be mixed with cooler water and will be scalding when you use it. Replacing the dip tube is a relatively simple task and doesn’t cost too much.

Dip Tube

The dip tube is a small but vital component in your water heater. It directs incoming cold replacement water to the bottom of your tank, warming it and separating it from the hot water floating on top that travels to your faucets and appliances. Without a working dip tube, cold incoming water would simply mix with the hot water in your heater’s tank and you’d be left with lukewarm water.

Most modern water heaters use non-metallic (or plastic) dip tubes rather than the older metal models, which were more prone to corrosion. Despite this, it’s possible for the plastic to erode over time, particularly when submerged in water of different temperatures and acidity. This is why many homeowners notice that their hot water isn’t as warm as it used to be, and may find small pieces of plastic in appliance filters and other parts of their home plumbing.

If you suspect that your water heater’s dip tube is degrading, it’s easy to replace. First, shut off the power at your circuit breaker for an electric water heater or the gas valve on your gas heater (depending on your model). Drain your tank by connecting a garden hose to the drain valve located at the bottom of the tank and running it to a drain.

After draining, close the cold water supply valve on your water heater and disconnect the dip tube. This is a short piece of pipe threaded on both ends and usually has a pipe nipple and connector that can be removed by turning them counterclockwise. Once you’ve removed the old dip tube, drop in a new one of the same length as the old. Be sure to choose a non-metallic dip tube that’s designed to withstand the acidity and temperatures of your hot water.

There are also a number of upgraded dip tube designs on the market that can enhance your water heater’s functionality, such as curved tubes that swirl your water as it passes through the tank to better stir up sediment and reduce mineral buildup. Choosing the right dip tube can save you money on utility bills, and is well worth your time to keep in tip-top shape!

Pressure Valve

The pressure relief valve is the most important water heater component to have working properly. This valve is designed to keep pressure below the water heater tank’s maximum safe pressure level, typically 150 psi (pounds per square inch). When it senses that pressure is building beyond this limit it opens and allows excess pressure to flow through it. This prevents the water pressure from reaching dangerous levels and potentially causing the tank to burst, flooding your home.

The valve is controlled by a spring that is compressed by the water pressure in your home’s pipes and regulated by a set point on the downstream side of the valve. This setting is determined by the distance between the regulator’s pressure-sensing passage and the pipeline’s Maximum Operating Pressure (MOP).

During operation, as the hot water flows through the system the pressure rises. This pressure is sensed in the pressure-sensing passage A and the spool shifts to allow flow. When the spool shifts, the pressure in the pressure-sensing passage B is greater than the pressure set point and the valve opens. Then the spool is retracted and the system pressure drops to the set point in the pressure-sensing passage C.

If your water heater’s temperature and pressure are ok but you’re experiencing banging noises coming from your tank it could be caused by loose connections or a faulty relief valve. It’s a good idea to have a professional inspect your water heater for loose or leaking connections at least once a year.

Turn off the water at your main shut-off valve. Remove the existing water pressure regulator and clean all surfaces where the new one will attach using grit cloth. Use a tape measure to mark the length of pipe that needs to be cut away from the wall to make room for the new regulator, then cut the pipe to this measurement. Make sure to mark the position of your new pressure regulator so you can reinstall it correctly. Once the pipe is cut, mark the location where the threaded couplings will go. Remove the old couplings and replace them with new ones. Screw the new pressure regulator onto the couplings, then tighten the external screw on the regulator.

post

All The Plumbing Repair Solutions You’re Looking For

by Posted in Uncategorized

There are a number of common plumbing issues that need professional attention. While some of these problems have at-home fixes, it’s always best for the longevity of your plumbing to let a plumber take care of them.

Some of the most common plumbing repairs include drain cleaning, clogs, water quality issues and leaks. Read on to learn more about these plumbing problems and who should fix them.

Clogged Drains

We rely on our drains to carry away waste, and it’s only natural that some of that material will build up over time. Clogged drains can lead to slow water flow, backups and even flooding. Fortunately, this is an easy problem to solve for homeowners with some basic tools and the know-how.

The first step is to shut off the water supply. This will keep any accidental water (like from a running toilet or dishwasher) from entering the clogged pipe and further worsening the situation. You may also want to put in a stopper or cover the drain with a rubber ducky (found at most hardware stores) to prevent further clogging until you can call in a professional.

Most clogged drains are caused by soap scum, hair, food particles and other solids that build up over time in your pipes and pipes’ openings. These clogs are often worse in areas with hard water, which has minerals that can settle and clog pipes. Installing a water softener can help with this problem.

Other clogs can be caused by flushing things down the drain that shouldn’t go in there, such as paper towels, tampons, baby wipes or other items from your toilets. A plunger can usually clear these types of clogs by creating a suction that forces the clog away from the pipe. If a plunger isn’t working, try using a drain snake, which you can find in most hardware stores. These are wire-like devices that you feed into a clogged pipe while cranking the handle, and they break up or pull away clog materials and move them through your pipes.

If none of these methods work, it’s time to call in a plumber. But before you do, try this tip: Pour one-half cup of salt and a half cup of baking soda down the clogged drain. This will cause a chemical reaction that will apply pressure and corrosive action to the clog, breaking it apart and dissolving it so your water can flow freely again. The salt and baking soda are inexpensive, but you might have to repeat this process a few times before it takes effect.

Leaking Pipes

Pipe leaks are a common problem, and they’re usually caused by age-related wear and tear or a bad joint. They may seem like a minor nuisance, but they can lead to water damage, expensive utility bills, and potential mold growth. The best thing you can do is to act fast — and use the right tools — to repair them.

There are a few different ways to fix leaking pipes. The first step is to turn off the water supply. Locate the stopcock, close it, and dry the area around the pipe before you start. This prevents further water damage and makes the job much easier.

The next step is to examine the pipe to determine what’s causing the leak. You can usually find the source of the leak by looking for signs of water damage or listening for hissing sounds. If the leak is in a hard-to-reach spot, you might need to use pressure testing equipment or specialized cameras to find it.

Once you’ve identified the source of the leak, it’s time to make a quick repair. Duct tape is a great option for most leaks, as long as you don’t have a break that spans more than several inches and you’re planning on a permanent solution soon after. To use duct tape, just close off the water supply, clean and dry the area, and wrap a couple layers of duct tape over the damaged section of pipe.

Another great option for a temporary leak fix is a pipe repair sleeve. These sleeves are available at most hardware stores and consist of a rubber gasket patch and a clamp that work together to seal the broken section of pipe. To use the sleeve, simply cut off a piece of rubber that’s about as long as the leaky section of pipe, wrap it around the broken area, and secure it with a hose clamp or pipe-sleeve clamp.

Another good option is a pipe repair patch and clamp kit, which is similar to the sleeve but works for larger breaks and can be used on a variety of pipe materials. Before using it, you’ll need to shut off the water supply, clean and dry the broken area, and sand down any rough edges to help the neoprene patch adhere properly.

Water Quality Issues

Water quality issues are caused by a variety of factors. These include naturally occurring contaminants such as arsenic and other heavy metals, which can leach from pipes and soil; industrial pollutants; and lack of sanitation. Many of these contaminants are carried by rainfall, runoff or stormwater to lakes, rivers, aquifers and coastal waters, where they have adverse impacts on aquatic ecosystems and human health. Some pollutants enter drinking water during treatment or distribution, including byproducts of chlorine bleaching and ion exchange processes. Others occur when water passes through corroded pipes, such as iron or galvanized steel, resulting in rust-colored water and a metallic taste.

Water-related problems are most common in homes with a private water supply, although they can also occur in public and community water supplies. These problems can cause health problems, damage equipment or plumbing, or make water undesirable due to its appearance, taste, odor or staining. Discolored water is usually a sign of other impurities in the water, such as silt or the presence of oxidized metals (which gives it a brown, orange, red, blue, or green tinge). Unpleasant odors are often caused by bacterial contamination or by hydrogen sulfides, which can give the water a rotten egg smell. Other unpleasant effects include dingy laundry or soap that doesn’t lather, greasy rings around bathtubs and sinks, scale build-up on shower heads, tubs and sinks, and gray or white film or spots in dishwashers.

Sewer Backups

If sewage is backing up into your sinks, tubs, toilets and showers, you have a serious problem. This hazard to your health and safety requires immediate action from a plumber. The first thing to do is shut off water going into all drains throughout your home. Also, turn off electricity if wastewater flows near electrical outlets. Then, if possible, shut off your home’s main water valve until your plumber arrives.

The signs of a sewer backup are clear: clogged toilets that don’t flush, murky-looking wastewater in drains and bathtubs, wet spots around floor drains in basements, garages and laundry rooms, and an unusual smell wafting through your home. In addition, your yard may show signs of damage from a blocked or damaged sewer line. Sewer repair experts can inspect your entire sewer system and make necessary repairs.

Heavy rains from summer storms are often to blame for sewer backups. When storms dump a lot of water at once, it can overload the municipal sewer systems and cause sewage to back up into homes. The good news is that it’s usually easy for a plumber to diagnose and fix this issue.

In some cases, what appears to be a sewer backup is actually just a single drain clog. Hair, grease and foreign objects can get stuck in individual sink, tub or toilet drains and block the flow of water. The best way to address this is with a drain auger or rooter, which can break up and remove the clog.

It’s also a good idea to have your sewer lines cleared every six to 10 years. Professionals can use a camera to look for cracks or damage, then clean and snake the lines to prevent future blockages. Homeowners can also help by not placing tree roots in or near the sewer lines, installing an exterior sewer cleanout and avoiding putting fat, grease and oils down the drains. You should also avoid connecting downspouts, french drains and sump pumps to the sanitary sewer line. These additional lines can cause clogs and even flood your home.